x
  • UEG30114

Certificate III in Gas Supply Industry Operations

At a glance

At a glance

Progress your career in the gas supply industry with this apprenticeship course. Gain the skills and knowledge you need to become a trade-qualified gas supply operator.

JOB PROSPECTS
  • Gas Supply Operator
COURSE OUTCOME

UEG30114 Certificate III in Gas Supply Industry Operations

Get Started Today
Enquire nowApply now
Course overview

Course overview

Develop skills in gas supply operations with this technical course. Complete this qualification as part of your apprenticeship to become a trade-qualified gas supply operator. You'll have opportunities to work in the gas supply industry on a wide variety of interesting projects.

You will develop practical skills and knowledge in key gas industry operations including installation, maintenance, fault find and repair, distribution, and transmission. Our industry experienced trainers will support you every step of the way towards success.

Upon successful completion of this course you can work as a gas supply operator. You will also have a solid foundation to complete further study and advance your career.

Units

The successful achievement of this qualification requires you to complete all units listed on your individual training plan.

UNIT CODE UNIT NAME
BSBFLM303C
Contribute to effective workplace relationships
BSBFLM312C
Contribute to team effectiveness
BSBWHS301A
Maintain workplace safety
BSBWOR301B
Organise personal work priorities and development
UEGNSG005A
Prepare to work in the gas industry
UEGNSG132A
Carry out basic work activities in a gas industry work environment
UEGNSG133A
Comply with environmental policies and procedures in the utilities industry
UEGNSG141A
Apply Workplace Health and Safety regulations, codes and practices in the gas supply industry

Note: Not all electives are available at all campuses.

UNIT CODE UNIT NAME
BSBFLM305C
Support operational plan
BSBFLM306C
Provide workplace information and resourcing plans
BSBFLM309C
Support continuous improvement systems and processes
BSBFLM311C
Support a workplace learning environment
BSBINN301A
Promote innovation in a team environment
BSBWHS303A
Participate in WHS hazard identification, risk assessment and risk control
CPCCLDG3001A
Licence to perform dogging
CPCCLRG3001A
Licence to perform rigging basic level
CPCCOHS1001A
Work safely in the construction industry
HLTAID001
Provide cardiopulmonary resuscitation
HLTAID003
Provide first aid
MSAPMOHS110A
Follow emergency response procedures
MSAPMOHS205A
Control minor incidents
MSAPMOHS216A
Operate breathing apparatus
MSAPMOHS217A
Gas test atmospheres
MSAPMPER200C
Work in accordance with an issued permit
MSAPMPER201A
Monitor and control work permits
MSAPMPER202A
Observe permit work
MSAPMPER300C
Issue work permits
MSAPMPER400A
Coordinate permit process
MSAPMSUP200A
Achieve work outcomes
MSAPMSUP210A
Process and record information
MSAPMSUP240A
Undertake minor maintenance
MSAPMSUP303A
Identify equipment faults
MSS402061A
Use SCADA systems in operations
PMAOPS305B
Operate process control systems
PMBWELD301B
Butt weld polyethylene plastic pipelines
PMBWELD302B
Electrofusion weld polyethylene pipelines
RIIHAN309D
Conduct telescopic materials handler operations
RIIMPO308D
Conduct tracked dozer operations
RIIMPO319D
Conduct backhoe/loader operations
RIIWHS202D
Enter and work in confined spaces
RIIWHS204D
Work safely at heights
TLIC2025A
Operate four wheel drive vehicle
TLIC3003A
Drive medium rigid vehicle
TLID2010A
Operate a forklift
TLILIC2001A
Licence to operate a forklift truck
TLILIC3017B
Licence to drive a heavy combination vehicle
TLILIC4009A
Licence to operate a slewing mobile crane (up to 60 tonnes)
UEENEEC001B
Maintain documentation
UEENEED101A
Use computer applications relevant to a workplace
UEENEEE102A
Fabricate, assemble and dismantle utilities industry components
UEENEEE107A
Use drawings, diagrams, schedules, standards, codes and specifications
UEENEEM020A
Attend to breakdowns in hazardous areas - gas atmospheres
UEENEEM076A
Use and maintain the integrity of a portable gas detection device
UEENEEM080A
Report on the integrity of explosion-protected equipment in a hazardous area
UEGNSG006A
Use a portable gas detector to locate escape
UEGNSG106B
Coordinate repair of pipeline, facilities and equipment
UEGNSG108B
Operate and monitor pipeline control systems
UEGNSG109B
Control field pipeline operations
UEGNSG110B
Supervise technical operations for gas distribution or transmission
UEGNSG135A
Monitor and control gas odourisation
UEGNSG136A
Carry out transmission pipeline construction work activities
UEGNSG137A
Operate and Maintain Gas Station Water Bath Heaters
UEGNSG138A
Install and commission stationary gas fuelled turbine engines
UEGNSG139A
Repair and maintain stationary gas fuelled turbine engines
UEGNSG140A
Apply environmental policies and procedures in the utilities industry
UEGNSG142A
Conduct isolations under the permit to work system for gas industry work sites
UEGNSG212B
Construct, lay and connect a gas distribution service to a plastic main
UEGNSG213B
Construct, lay and connect a gas distribution service to a steel main
UEGNSG216A
Commission or decommission gas distribution pipelines
UEGNSG217A
Launch and recover PIGs in a gas distribution pipeline
UEGNSG218A
Carry out surveillance on gas distribution assets
UEGNSG219A
Conduct excavations in the utilities industry
UEGNSG220A
Construct and lay Polyethylene gas distribution mains
UEGNSG221A
First on site response to gas pipeline emergencies
UEGNSG222A
Construct and lay Nylon or PVC gas distribution mains
UEGNSG223A
Construct and lay steel gas distribution pipelines
UEGNSG225A
Perform routine maintenance on distribution pipeline facilities and equipment
UEGNSG227A
Assist with the construction and laying of gas distribution mains
UEGNSG310B
Supervise and monitor contract work
UEGNSG311B
Site control of third party works in the vicinity of a transmission pipeline
UEGNSG314B
Liaise with third party and the community to maintain pipeline integrity and community safety
UEGNSG327A
Coordinate transmission pipeline construction operations
UEGNSG331A
Establish right of way access for transmission pipeline construction
UEGNSG332A
Undertake hydro-testing for transmission pipeline construction
UEGNSG342A
Maintain pipeline easements
UEGNSG344A
Commission or decommission gas transmission pipelines
UEGNSG346A
Launch and recover PIGs in gas transmission pipelines
UEGNSG347A
Perform routine maintenance on transmission pipeline facilities and equipment
UEGNSG349A
Carry out surveillance of gas transmission pipelines
UEGNSG355A
Monitor and report on cathodic protection systems
UEGNSG356A
Monitor and operate flow control, pressure measuring and regulating devices for gas transmission
UEGNSG411A
Maintain cathodic protection systems
UEGNSG412A
Install cathodic protection systems
UEGNSG507A
Remotely monitor and operate gas transmission flow and pressure measuring and regulating devices
UEGNSG611B
Control LPG storage/processing operations
UEGNSG614A
Load, unload, exchange and connect LPG cylinders
UEGNSG615A
Fill LPG cylinders
UEGNSG617A
Monitor and control the transfer of bulk LPG
UEGNSG618A
Process Liquefied Petroleum Gas (LPG)
UEGNSG621A
Control bulk storage of LPG
UEGNSG712A
Read and record meter readings
UEGNSG805A
Maintain Multi-Stage and Multi-Run Gas Flow and Pressure Measuring and Regulating Devices
UEGNSG806A
Maintain SCADA controlled flow and pressure equipment and electronic gas measurement equipment
UEGNSG807A
Install Gas Flow, Measuring and Pressure Regulating Devices
UEGNSG811A
Monitor and operate complex flow control, measuring and regulating devices for gas distribution
UEPMNT367A
Install and commission stationary gas fuelled reciprocating engines
UEPMNT368A
Repair and maintain stationary gas fuelled reciprocating engines
UEPOPS317B
Operate and monitor fixed fire protection systems
UEPOPS336B
Manage, operate and monitor a gas turbine unit
UEPOPS347B
Operate and monitor supervisory, control and data acquisition systems
UETTDREL14A
Working safely near live electrical apparatus as a non-electrical worker

Note: Not all electives are available at all campuses.

Get Started Today
Enquire nowApply now
Ways to study

Ways to study

Get Started Today
Enquire nowApply now

University pathways

If you want to go on to further study at university, TAFE Queensland has a pathway option to get you there. In many cases, completing one of our diplomas will give you a full year of credit towards a degree with one of our partner universities.

Learn more about university pathways
  • James Cook University
  • University of Queensland
  • University of Canberra
  • Griffith University
  • Queensland University of Technology
  • University of Southern Queensland
Payment options

Payment options

No matter what your circumstances, TAFE Queensland has a payment option to suit you. If you are unsure of what's right for you, get in touch. We're here to help.

Money IconUpfront payment

This is the total cost of the course you need to pay when you enrol if you are not eligible for a subsidy or concession.

Learn more

Money IconPayment plan

If you have difficulty paying for the full cost of a course upfront, you may be eligible for a payment plan.

Learn more

Get Started Today
Enquire nowApply now
Important Information
Important Information

Important Information


Entry requirements

There are no formal entry requirements for this course.

Selection criteria

To study an apprenticeship or traineeship program you must be indentured as an apprentice or trainee with your employer.

Employers need to be able to provide the necessary human and physical resources to qualify for an apprentice.

Resources required

You are responsible for meeting the minimum occupational health and safety requirements in practical classes. This includes the use of safety glasses, protective footwear with covered uppers, steel capped toes and non-slip soles to AS2210, leather gloves to AS2161, and hair protection. You should also wear 100% cotton drill industry-standard clothing.

If you fail to meet these minimum standards of dress, you will not be permitted entry into practical classes.

Need to know

Federal incentives may be available for employers, apprentices and trainees.  Visit the Australian Apprenticeship Centre for more information.

Assessment Methods

Skill and knowledge assessments are an essential step in progressing through your course. You may be assessed in a number of ways while you are studying at TAFE Queensland, including observation, written assessment, questioning, portfolios, work samples, third-party feedback, and through recognition of prior learning. Read more about assessment methods.

Disclaimer

All information was accurate at time of publication, however TAFE policies, tuition fees and course content is subject to change without notice. Course commencement is dependent on sufficient enrolments.

Get Started Today
Enquire nowApply now
How to apply

How to apply

Recognition of Prior Learning (RPL) and credit transfers


Fast track your way to a formal qualification by earning credit for the things you already know. Getting recognition for the skills you've gained from the workplace or previous learning means less study time for you, and getting the paper to prove you're qualified a whole lot sooner. We can assess your skills, directly apply credits from previous successful study, and give you advanced standing in your course.

Learn more

test

Get started with TAFE Queensland

If you have read and understood the student rules, refund policy, understand your fees and payment options, have a Unique Student Identifier (USI) and checked you meet the entry requirements and selection criteria for this course, you're ready to get started.

University pathways

If you want to go on to further study at university, TAFE Queensland has a pathway option to get you there. In many cases, completing one of our diplomas will give you a full year of credit towards a degree with one of our partner universities.

Learn more about university pathways
  • James Cook University
  • University of Queensland
  • University of Canberra
  • Griffith University
  • Queensland University of Technology
  • University of Southern Queensland