UEE33020

Certificate III in Electrical Fitting

Kick start your electrical career with this entry-level course and develop the practical knowledge and skills to become a qualified electrical fitter.

STUDY LOCATIONS Greater Brisbane Gold Coast Darling Downs and South West Wide Bay Burnett

WAYS TO STUDY Apprenticeships and traineeships

NEXT INTAKE Starts anytime View all intakes

Course overview

Kick start your electrical career with this entry-level course. Develop the practical knowledge and skills to become a qualified electrical fitter. The combination of strong job prospects and above average earning potential make a career as an electrical fitter a solid choice. According to the latest labour market information job openings for electricians and related occupations are expected to exceed 50,000 over the next five years.

In this course you will learn how to manufacture, fit, assemble, erect, operate, test, fault-find, alter, and repair electrical equipment. You will also develop skills in electrical wiring work including assembling, maintaining, terminating, and altering wiring that is between electrical components of a plant or machinery. Our industry experienced teachers will give you the one-on-one guidance and support you need to succeed.

Upon successful completion of this course you will be qualified to work as an electrical fitter. You will also have a solid foundation to continue with further study and advance your career.

What can I do?

Electrical Fitter

Course outcome:

UEE33020 Certificate III in Electrical Fitting

Flexibility

TAFE Queensland understands the flexibility needed to fit your training in with your work arrangements. With a range of study options we will ensure your training plan suits you and your employer.

Free apprenticeships

The Queensland Government is providing access to fully subsidised training across a range of priority apprenticeship or traineeship qualifications to support Queenslanders. Eligible qualifications have been chosen based on skills demand and advice from industry. If you’re eligible for funding, your course costs will be covered by the state government. Learn more>

What you will study

The successful achievement of this qualification requires you to complete all core units listed below, plus a combination of elective units with a total value of 250 points. Please note, elective units have various points values. Elective units will be selected in consultation with your employer and included on your training plan.

UNIT CODE
UNIT NAME

UNIT CODE
HLTAID009

Provide cardiopulmonary resuscitation

UNIT CODE :
HLTAID009

Unit description :
This unit describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) guidelines. This unit applies to all persons who may be required to provide CPR, in a range of situations, including community and workplace settings.
UNIT NAME
Provide cardiopulmonary resuscitation

UNIT CODE
UEECD0007

Apply work health and safety regulations, codes and practices in the workplace

UNIT CODE :
UEECD0007

Unit description :
This unit involves the skills and knowledge required to apply work health and safety (WHS)/occupational health and safety (OHS) regulations and codes of practices in the electrotechnology workplace.
UNIT NAME
Apply work health and safety regulations, codes and practices in the workplace

UNIT CODE
UEECD0016

Document and apply measures to control WHS risks associated with electrotechnology work

UNIT CODE :
UEECD0016

Unit description :
This unit involves the skills and knowledge required to identify, document and apply work health and safety (WHS)/occupational health and safety (OHS) hazard and risk control measures associated with electrotechnology work.

Pre-requisite unit :
UEECD0007
UNIT NAME
Document and apply measures to control WHS risks associated with electrotechnology work

UNIT CODE
UEECD0019

Fabricate, assemble and dismantle utilities industry components

UNIT CODE :
UEECD0019

Unit description :
This unit involves the skills and knowledge required to fabricate, assemble and dismantle utilities industry components using fitting and metal fabrication techniques.

Pre-requisite unit :
UEECD0007
UNIT NAME
Fabricate, assemble and dismantle utilities industry components

UNIT CODE
UEECD0020

Fix and secure electrotechnology equipment

UNIT CODE :
UEECD0020

Unit description :
This unit involves the skills and knowledge required to fix, secure and mount electrotechnology equipment to hollow walls, solid walls and metal fixings.

Pre-requisite unit :
UEECD0007
UNIT NAME
Fix and secure electrotechnology equipment

UNIT CODE
UEECD0044

Solve problems in multiple path circuits

UNIT CODE :
UEECD0044

Unit description :
This unit involves the skills and knowledge required to solve problems in multiple path circuits.

Pre-requisite unit :
UEECD0007 , UEECD0046
UNIT NAME
Solve problems in multiple path circuits

UNIT CODE
UEECD0046

Solve problems in single path circuits

UNIT CODE :
UEECD0046

Unit description :
This unit involves the skills and knowledge required to solve problems in single path circuits.

Pre-requisite unit :
UEECD0007
UNIT NAME
Solve problems in single path circuits

UNIT CODE
UEECD0051

Use drawings, diagrams, schedules, standards, codes and specifications

UNIT CODE :
UEECD0051

Unit description :
This unit involves the skills and knowledge required to use drawings, diagrams, cable schedules, industry standards, codes of practice and specifications as they apply to various electrotechnology work functions.

Pre-requisite unit :
UEECD0007
UNIT NAME
Use drawings, diagrams, schedules, standards, codes and specifications

UNIT CODE
UEECO0023

Participate in electrical work and competency development activities

UNIT CODE :
UEECO0023

Unit description :
This unit involves the skills and knowledge required to participate in electrical work and related activities that contribute to the ongoing development of competency.
UNIT NAME
Participate in electrical work and competency development activities

UNIT CODE
UEEEL0003

Arrange circuits, control and protection for electrical installations

UNIT CODE :
UEEEL0003

Unit description :
This unit involves the skills and knowledge required to select, arrange and terminate circuits, control and protection devices and systems for electrical installations operating at low voltage (LV).

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEEL0019 , UEEEL0020 , UEEEL0021 , UEEEL0023
UNIT NAME
Arrange circuits, control and protection for electrical installations

UNIT CODE
UEEEL0005

Develop and connect electrical control circuits

UNIT CODE :
UEEEL0005

Unit description :
This unit involves the skills and knowledge required to develop, connect and functionally test electrical power and control circuits that perform specific control functions.

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEEL0003 , UEEEL0019 , UEEEL0020 , UEEEL0021 , UEEEL0023 , UEEEL0024 , UEEEL0025
UNIT NAME
Develop and connect electrical control circuits

UNIT CODE
UEEEL0014

Isolate, test and troubleshoot low voltage electrical circuits

UNIT CODE :
UEEEL0014

Unit description :
This unit involves the skills and knowledge required to isolate, test and troubleshoot electrical circuits operating at voltages up to 1,000 volts (V) alternating current (a.c.) or 1,500 V direct current (d.c.).

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEEL0003 , UEEEL0019 , UEEEL0020 , UEEEL0021 , UEEEL0023 , UEEEL0024 , UEEEL0025 , UEEEL0047
UNIT NAME
Isolate, test and troubleshoot low voltage electrical circuits

UNIT CODE
UEEEL0019

Solve problems in direct current (d.c.) machines

UNIT CODE :
UEEEL0019

Unit description :
This unit involves the skills and knowledge required to determine correct operation of direct current (d.c.) machines and provide solutions as they apply to electrical installations and equipment.

Pre-requisite unit :
UEECD0007 , UEECD0043 , UEEEL0021
UNIT NAME
Solve problems in direct current (d.c.) machines

UNIT CODE
UEEEL0020

Solve problems in low voltage a.c. circuits

UNIT CODE :
UEEEL0020

Unit description :
This unit involves the skills and knowledge required to ascertain correct operation of single and three phase alternating current (a.c.) circuits and solving circuit problems as they apply to servicing, fault finding, installation and compliance work functions.

Pre-requisite unit :
UEECD0007 , UEECD0043 , UEECD0044 , UEECD0046 , UEEEL0021
UNIT NAME
Solve problems in low voltage a.c. circuits

UNIT CODE
UEEEL0021

Solve problems in magnetic and electromagnetic devices

UNIT CODE :
UEEEL0021

Unit description :
This unit involves the skills and knowledge required to determine correct operation of electromagnetic devices and related circuits and provide solutions as they apply to electrical installations and equipment. Other pre-requisite options may be available. Please see https://training.gov.au/Training/Details/UEEEL0021 for details.

Pre-requisite unit :
UEECD0007 , UEECD0043
UNIT NAME
Solve problems in magnetic and electromagnetic devices

UNIT CODE
UEEEL0023

Terminate cables, cords and accessories for low voltage circuits

UNIT CODE :
UEEEL0023

Unit description :
This unit involves the skills and knowledge required to terminate cables, cords and their conductors at accessories and current-using devices, designed to operate at voltages up to 1,000 volts (V) alternating current (a.c.) or 1,500 V direct current (d.c.).

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051
UNIT NAME
Terminate cables, cords and accessories for low voltage circuits

UNIT CODE
UEEEL0024

Test and connect alternating current (a.c.) rotating machines

UNIT CODE :
UEEEL0024

Unit description :
This unit involves the skills and knowledge required to test and connect alternating current (a.c.) rotating machines. It includes safe working practices, ascertaining correct operation of a.c. machines and solving problems as they apply to servicing, fault finding, installation and compliance work functions.

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEEL0019 , UEEEL0020 , UEEEL0021 , UEEEL0023
UNIT NAME
Test and connect alternating current (a.c.) rotating machines

UNIT CODE
UEEEL0025

Test and connect transformers

UNIT CODE :
UEEEL0025

Unit description :
This unit involves the skills and knowledge required to solve problems in transformers. It includes safe working practices, ascertaining correct operation of transformers and solving problems as they apply to servicing, fault finding, installation and compliance work functions.

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEEL0019 , UEEEL0020 , UEEEL0021 , UEEEL0023
UNIT NAME
Test and connect transformers

UNIT CODE
UEEEL0028

Conduct compliance and functional verification of electrical apparatus and existing circuits

UNIT CODE :
UEEEL0028

Unit description :
This unit involves the skills and knowledge required to conduct compliance and functional verification of electrical apparatus and existing circuits.

Pre-requisite unit :
UEECD0007 , UEECD0016 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEEL0003 , UEEEL0005 , UEEEL0014 , UEEEL0019 , UEEEL0020 , UEEEL0021 , UEEEL0023 , UEEEL0024 , UEEEL0025 , UEEEL0047
UNIT NAME
Conduct compliance and functional verification of electrical apparatus and existing circuits

UNIT CODE
UEEEL0047

Identify, shut down and restart systems with alternate supplies

UNIT CODE :
UEEEL0047

Unit description :
This unit involves the skills and knowledge required to identify, shut down and restart systems with alternate supplies.

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEEL0003 , UEEEL0019 , UEEEL0020 , UEEEL0021 , UEEEL0023
UNIT NAME
Identify, shut down and restart systems with alternate supplies

UNIT CODE
UEERE0001

Apply environmentally and sustainable procedures in the energy sector

UNIT CODE :
UEERE0001

Unit description :
This unit involves the skills and knowledge required to apply environmentally sustainable procedures in the energy sector.
UNIT NAME
Apply environmentally and sustainable procedures in the energy sector

UNIT CODE
UNIT NAME

UNIT CODE
UEEAS0007

Assemble, mount and connect control gear and switchgear

UNIT CODE :
UEEAS0007

Unit description :
This unit involves the skills and knowledge required to assemble, mount and connect control gear and switchgear, including the interconnections within a switchboard enclosure intended to operate at voltages up to 1,000 volts (V) alternating current (a.c.) or 1,500 V direct current (d.c.).

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEEL0003 , UEEEL0005 , UEEEL0019 , UEEEL0020 , UEEEL0021 , UEEEL0023 , UEEEL0024 , UEEEL0025
UNIT NAME
Assemble, mount and connect control gear and switchgear

UNIT CODE
UEEAS0009

Mount and wire control panel equipment

UNIT CODE :
UEEAS0009

Unit description :
This unit involves the skills and knowledge required to mount and wire control panel equipment.

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEEL0003 , UEEEL0005 , UEEEL0019 , UEEEL0020 , UEEEL0021 , UEEEL0023 , UEEEL0024 , UEEEL0025
UNIT NAME
Mount and wire control panel equipment

UNIT CODE
UEECD0011

Comply with scheduled and preventative maintenance program processes

UNIT CODE :
UEECD0011

Unit description :
This unit involves the skills and knowledge required to comply with the quality assurance and risk management processes for scheduled and preventative maintenance of the electrotechnology aspects of plant and equipment.
UNIT NAME
Comply with scheduled and preventative maintenance program processes

UNIT CODE
UEECS0033

Use engineering applications software on personal computers

UNIT CODE :
UEECS0033

Unit description :
This unit involves the skills and knowledge required to use computer application software relevant to engineering support work functions.
UNIT NAME
Use engineering applications software on personal computers

UNIT CODE
UEEDV0005

Install and maintain cabling for multiple access to telecommunication services

UNIT CODE :
UEEDV0005

Unit description :
This unit involves the skills and knowledge required to install and maintain telecommunications cabling in buildings and premises.

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051
UNIT NAME
Install and maintain cabling for multiple access to telecommunication services

UNIT CODE
UEEDV0008

Install, modify and verify coaxial and structured communication copper cabling

UNIT CODE :
UEEDV0008

Unit description :
This unit involves the skills and knowledge required to install, modify and verify coaxial and structured communication copper cabling in buildings and premises intended for connection to a telecommunications network as permitted by the Australian Communications and Media Authority (ACMA).

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEDV0005
UNIT NAME
Install, modify and verify coaxial and structured communication copper cabling

UNIT CODE
UEEEL0008

Evaluate and modify low voltage heating equipment and controls

UNIT CODE :
UEEEL0008

Unit description :
This unit involves the skills and knowledge required to evaluate and modify low voltage (LV) heating equipment and controls.

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEEL0019 , UEEEL0020 , UEEEL0021 , UEEEL0023
UNIT NAME
Evaluate and modify low voltage heating equipment and controls

UNIT CODE
UEEEL0009

Evaluate and modify low voltage lighting circuits, equipment and controls

UNIT CODE :
UEEEL0009

Unit description :
This unit involves the skills and knowledge required to evaluate and modify low voltage (LV) lighting circuits, equipment and controls.

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEEL0019 , UEEEL0020 , UEEEL0021 , UEEEL0023
UNIT NAME
Evaluate and modify low voltage lighting circuits, equipment and controls

UNIT CODE
UEEEL0010

Evaluate and modify low voltage socket outlets circuits

UNIT CODE :
UEEEL0010

Unit description :
This unit involves the skills and knowledge required to evaluate and modify low voltage (LV) socket outlets circuits.

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEEL0019 , UEEEL0020 , UEEEL0021 , UEEEL0023
UNIT NAME
Evaluate and modify low voltage socket outlets circuits

UNIT CODE
UEEEL0046

Find and repair faults in LV d.c. electrical apparatus and circuits

UNIT CODE :
UEEEL0046

Unit description :
This unit involves the skills and knowledge required to find and repair faults in electrical apparatus and interconnecting circuits and equipment operating at voltages up to 1,500 volts (V) direct current (d.c.).

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEEL0003 , UEEEL0008 , UEEEL0009 , UEEEL0010 , UEEEL0014 , UEEEL0019 , UEEEL0020 , UEEEL0021 , UEEEL0023 , UEEEL0024 , UEEEL0025
UNIT NAME
Find and repair faults in LV d.c. electrical apparatus and circuits

UNIT CODE
UEEEL0056

Place and connect electrical coils

UNIT CODE :
UEEEL0056

Unit description :
This unit involves the skills and knowledge required to insulate, place and connect electrical coils in small armature/stators, transformers and solenoid equipped devices.

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0043 , UEECD0051 , UEEEL0074
UNIT NAME
Place and connect electrical coils

UNIT CODE
UEEEL0067

Rewind single phase machines

UNIT CODE :
UEEEL0067

Unit description :
This unit involves the skills and knowledge required to dismantle and wind stators for single phase machines.

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEEL0019 , UEEEL0020 , UEEEL0021 , UEEEL0023 , UEEEL0024 , UEEEL0025 , UEEEL0056 , UEEEL0074
UNIT NAME
Rewind single phase machines

UNIT CODE
UEEEL0068

Rewind three phase low voltage induction machines

UNIT CODE :
UEEEL0068

Unit description :
This unit involves the skills and knowledge required to prepare, place and connect coils and insulation in three phase stators and rotors in low voltage (LV) induction machine.

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0020 , UEECD0043 , UEECD0051 , UEEEL0019 , UEEEL0020 , UEEEL0021 , UEEEL0023 , UEEEL0024 , UEEEL0025 , UEEEL0056 , UEEEL0074
UNIT NAME
Rewind three phase low voltage induction machines

UNIT CODE
UEEEL0074

Wind electrical coils

UNIT CODE :
UEEEL0074

Unit description :
This unit involves the skills and knowledge required to set up coil former and winding machine/s to wind electrical coils for static and rotating electrical machines.

Pre-requisite unit :
UEECD0007 , UEECD0019 , UEECD0051
UNIT NAME
Wind electrical coils

UNIT CODE
UEEIC0002

Assemble, enter and verify operating instructions in microprocessor equipped devices

UNIT CODE :
UEEIC0002

Unit description :
This unit involves the skills and knowledge required to assemble, enter and verify operating instructions in microprocessor equipped device with simple inbuilt programming functions ensuring the device operates as intended.

Pre-requisite unit :
UEECD0007
UNIT NAME
Assemble, enter and verify operating instructions in microprocessor equipped devices

UNIT CODE
UEEIC0013

Develop, enter and verify discrete control programs for programmable controllers

UNIT CODE :
UEEIC0013

Unit description :
This unit involves the skills and knowledge required to develop, enter and verify programs for programmable logic controller (PLC) (also known as programmable controller) for a system requiring discrete control functions.

Pre-requisite unit :
UEECD0007
UNIT NAME
Develop, enter and verify discrete control programs for programmable controllers

UNIT CODE
UEERA0050

Install refrigerant pipe work, flow controls and accessories

UNIT CODE :
UEERA0050

Unit description :
This unit involves the skills and knowledge required to install refrigerant piping/tubing, fittings, flow controls and accessories for refrigeration and air conditioning systems in buildings and premises in accordance with relevant regulations, industry standards, codes of practice, manufacturer instructions, and industry and workplace requirements.

Pre-requisite unit :
UEECD0007
UNIT NAME
Install refrigerant pipe work, flow controls and accessories

UNIT CODE
UEERL0004

Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring

UNIT CODE :
UEERL0004

Unit description :
This unit involves the skills and knowledge required to disconnect and reconnect electrical equipment connected to low voltage (LV) installation wiring.

Pre-requisite unit :
UEECD0007
UNIT NAME
Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring

UNIT CODE
UETDRRF004

Perform rescue from a live LV panel

UNIT CODE :
UETDRRF004

Unit description :
This unit covers the performance of rescue procedures from live low voltage (LV) apparatus, not including overhead lines and underground cables in the workplace. It specifies the mandatory requirements of rescue from a live LV panel and how they apply in the context of transmission, distribution or rail work functions. It encompasses responsibilities for health, safety and risk management processes at all operative levels and adherence to safety practices as part of the normal way of doing work.

Pre-requisite unit :
HLTAID009
UNIT NAME
Perform rescue from a live LV panel

Note: For some courses, not all electives are available at all campuses.

Ways to study

Choose your study location

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Acacia Ridge	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Bracken Ridge	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Eagle Farm	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Ipswich	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Ashmore	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Chinchilla	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online
Toowoomba	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Kingaroy	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

At TAFE Queensland, we understand that employers need options and flexibility in employee training. We are committed to delivering the flexible training plans you need to get the job done. Choose from workplace training, block training, drop in days, mobile training, day release, online or a mix of all these options. Learn more

You must already be employed to enrol as an apprentice or trainee with TAFE Queensland. Speak to your employer about choosing TAFE Queensland as your Supervising Registered Training Organisation (SRTO).

Costs:

Eligible apprentices and trainees that meet the Queensland state funding requirements will be charged a set fee per nominal hour. These fees are calculated at a regulated rate of $1.60 per nominal hour. Concession rates apply for students who hold a current Health Care Card or who identify as Aboriginal or Torres Strait Islander.

Non-funded apprentices and trainees will be charged a fee for service cost. These will be confirmed prior to the commencement of training.
Information regarding costs will be outlined on the agreed training plan, which will be provided to the employer and apprentice or trainee at time of induction.

Download Brochure

Certificate III in Electrical Fitting (UEE33020)

Ask a question

Certificate III in Electrical Fitting

COURSE CODE: UEE33020

Payment Options

How can I pay for this course?

No matter what your circumstances, TAFE Queensland has a payment option to suit you. If you are unsure of what’s right for you, get in touch. We’re here to help.

Payment plan

If you have difficulty paying for the full cost of a course upfront, you may be eligible for a payment plan.

Learn more

Upfront payment

This may be the full fee for the course, or the student contribution amount if you are eligible for a subsidy or concession.

Learn more

Entry requirements

Skills check

You will be invited to complete a Skills Check following your application submission, before enrolling to your studies. This helps you to decide if your course is right for you and allows us to understand your current abilities in English, Maths, as well as using Digital technology.

The recommended benchmark levels for this course are 3 in English, 4 in Maths and 3 in Digital Technology.

Access and instructions on how to complete the Skills Check will be emailed to you once you have submitted your application.

Read the Skills Check FAQs.

Selection criteria

To study an apprenticeship program you must be indentured as an apprentice with your employer.

Employers need to be able to provide the necessary human and physical resources to qualify for an apprentice.

Find out more on how to become an apprentice or trainee

Resources required

You are responsible for meeting the minimum occupational health and safety requirements in practical classes.
This includes the use of:

safety glasses
protective footwear with safety toe cap and non-slip soles to AS2210
long leather gloves to AS2161
hair protection
You should also wear 100% cotton drill industry-standard clothing.

If you fail to meet these minimum standards of dress, you will not be permitted entry into practical classes.

Assessment methods

Skill and knowledge assessments are an essential step in progressing through your course. You may be assessed in a number of ways while you are studying at TAFE Queensland, including observation, written assessment, questioning, portfolios, work samples, third-party feedback, and through recognition of prior learning. Read more about assessment methods.

Pathways

University pathways

If you want to go on to further study at university, TAFE Queensland has a pathway option to get you there. In many cases, completing one of our diplomas may give you a full year of credit towards a degree with one of our partner universities.

Learn more about University Pathways

How to apply

Direct application

If you're ready to get started, simply hit the Apply Now button on your preferred course information page and get your application underway online.

Course disclaimer

All information was accurate at time of publication, however TAFE policies, tuition fees, available subsidies, and course content is subject to change without notice. Course commencement is dependent on sufficient enrolment numbers. Timetable information is subject to change prior to commencement and/or during the duration of your course.

Recognition of prior learning (RPL) and credit transfers

Fast track your way to a formal qualification by earning credit for the things you already know. We can assess your skills, directly apply credits from previous successful study, and give you advanced standing in your course.

Learn more

Related courses

Certificate IV in Electrical - Instrumentation

Take the next step in your electrical career with this post-trade qualification and develop the specialised skills and knowledge needed to work in instrumentation.

Careers

Instrumentation Maintenance Tradesperson
Electrical Instrumentation Tradesperson
Instrumentation and Control Technician

Part Time : up to 6 months per unit

Advanced Diploma of Engineering Technology - Electrical

Take control of your career with this high-level course and develop the highly specialised skills and knowledge required to become an electrical engineering technician.

Careers

Electronic Engineering Draftsperson
Electronic Engineering Technician

Full Time : 2 years

Next Start : 27 Jan 2026

😊 Personalise my view

I am

interested in studying

interested in studying

currently studying

interested in studying

interested in

interested in

interested in

interested in studying

at

Campus

Campus

Campus

Campus

Campus

Campus

Campus

Certificate III in Electrical Fitting

Course overview

What can I do?

Course outcome:

Flexibility

Free apprenticeships

Core units

Elective units

Download Brochure

Ask a question

Certificate III in Electrical Fitting

Payment Options

How can I pay for this course?

Payment plan

Upfront payment

Entry requirements

Skills check

Selection criteria

Resources required

Assessment methods

Pathways

University pathways

How to apply

Direct application

Course disclaimer

Recognition of prior learning (RPL) and credit transfers

Related courses

Certificate IV in Electrical - Instrumentation

Careers

Advanced Diploma of Engineering Technology - Electrical

Careers