MEM31922

Certificate III in Engineering - Fabrication Trade

Surface Finishing

Progress your career in engineering fabrication with this apprenticeship course. Gain specialised, technical skills to become a trade qualified surface finisher.

STUDY LOCATIONS Greater Brisbane

WAYS TO STUDY Apprenticeships and traineeships

NEXT INTAKE Starts anytime View all intakes

Course overview

Progress your career in engineering by becoming a trade qualified surface finisher. With growth in the industry, particularly in repair and maintenance work and bespoke product development, the technical skills of surface finishers will be in demand.

In this course you will gain the skills and knowledge required to alter the surface of manufactured items to achieve certain properties. You will be given the technical skills to improve appearance, adhesion or wettability of a range of surfaces and alter hardness, surface friction and electrical conductivity. You will also learn how to make surfaces resistant to corrosion, tarnish, wear or chemicals to improve their durability. Our industry-expert teachers will ensure you can apply your skills and knowledge to create or maintain and repair products and components to help you succeed.

Successful completion of this course will allow you to become a trade qualified surface finisher and progress your career in the engineering fabrication field.

What can I do?

Surface Finisher

Course outcome:

MEM31922 Certificate III in Engineering - Fabrication Trade (Surface finishing)

Industry connections

At TAFE Queensland we maintain strong and relevant industry connections. Our teachers have their finger on the pulse and are equipped to guide you through your education to give you the ability to meet and exceed expectations set within the business world.

Free apprenticeships for under 25s

The Queensland government is supporting young Queenslanders up to the age of 25 by providing access to fully subsidised training across a range of priority apprenticeship or traineeship qualifications. Learn more>

What you will study

The successful achievement of this qualification requires you to complete all core units listed below, plus a combination of elective units with a total value of 96 points. Please note, elective units have various points values. Elective units will be selected in consultation with your employer and included on your training plan.

UNIT CODE
UNIT NAME

UNIT CODE
MEM09002

Interpret technical drawing

UNIT CODE :
MEM09002

Unit description :
This unit of competency defines the skills and knowledge required to interpret technical drawings.

Pre-requisite unit :
MEM12023 , MEM12024 , MEM13015 , MEM16006
UNIT NAME
Interpret technical drawing

UNIT CODE
MEM11011

Undertake manual handling

UNIT CODE :
MEM11011

Unit description :
This unit of competency defines the skills and knowledge required to lift and move materials manually and/or using basic manual handling equipment in a wide range of environments

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Undertake manual handling

UNIT CODE
MEM12023

Perform engineering measurements

UNIT CODE :
MEM12023

Unit description :
This unit of competency defines the skills and knowledge required to perform measurements requiring straightforward use of mechanical measuring devices which incorporate visual inspections representing units of measurement and associated calculations in a range of manufacturing, engineering and related environments. Measurements may be expressed in metric or imperial units.

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Perform engineering measurements

UNIT CODE
MEM12024

Perform computations

UNIT CODE :
MEM12024

Unit description :
This unit of competency defines the skills and knowledge required to estimate approximate answers to arithmetical problems, carry out calculations involving percentages and proportions, and determine simple ratios and averages.

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Perform computations

UNIT CODE
MEM13015

Work safely and effectively in manufacturing and engineering

UNIT CODE :
MEM13015

Unit description :
This unit of competency defines the skills and knowledge required to work effectively in manufacturing and engineering work situations, including planning routine work and participating in and following work health and safety (WHS) procedures.
UNIT NAME
Work safely and effectively in manufacturing and engineering

UNIT CODE
MEM14006

Plan work activities

UNIT CODE :
MEM14006

Unit description :
This unit of competency covers the skills and knowledge required to plan familiar work activities, whilst following established procedures and work health and safety (WHS) policies and procedures of the organisation.

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Plan work activities

UNIT CODE
MEM16006

Organise and communicate information

UNIT CODE :
MEM16006

Unit description :
This unit of competency covers the skills and knowledge required to access, organise and communicate information related to production, maintenance or associated processes or tasks that apply in manufacturing, engineering or related environments.

Pre-requisite unit :
MEM13015
UNIT NAME
Organise and communicate information

UNIT CODE
MEM16008

Interact with computing technology

UNIT CODE :
MEM16008

Unit description :
This unit of competency defines the skills and knowledge required to use a range of computing technology typically used in manufacturing, engineering or related environments to access, input and store information.

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Interact with computing technology

UNIT CODE
MEM17003

Assist in the provision of on the job training

UNIT CODE :
MEM17003

Unit description :
This unit of competency defines the skills and knowledge required to assist in the provision of on-the-job training to others while undertaking normal duties and it may involve the replacement of normal duties with training duties for limited periods of time.

Pre-requisite unit :
MEM13015 , MEM16006
UNIT NAME
Assist in the provision of on the job training

UNIT CODE
MEM18001

Use hand tools

UNIT CODE :
MEM18001

Unit description :
This unit of competency defines the skills and knowledge required to use a range of hand tools for a variety of general engineering applications.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Use hand tools

UNIT CODE
MEM18002

Use power tools/hand held operations

UNIT CODE :
MEM18002

Unit description :
This unit of competency defines the skills and knowledge required to use a range of hand held power tools and fixed power tools for hand held operations used in a variety of general engineering applications.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Use power tools/hand held operations

UNIT CODE
MSMENV272

Participate in environmentally sustainable work practices

UNIT CODE :
MSMENV272

Unit description :
This unit describes the skills and knowledge required to comply with environmental regulations, identify environment issues and minimise the risks of negative impact on work and carry out improvements in own work area.
UNIT NAME
Participate in environmentally sustainable work practices

UNIT CODE
UNIT NAME

UNIT CODE
MEM08002

Pre-treat work for subsequent surface coating

UNIT CODE :
MEM08002

Unit description :
This unit of competency defines the skills and knowledge required to carry out pre-treatment of common ferrous and non-ferrous work for finishing by a wide variety of processes and involves adjustments to apparatus/ equipment/ controls.

Pre-requisite unit :
MEM11011 , MEM13003 , MEM13015 , MEM16006
UNIT NAME
Pre-treat work for subsequent surface coating

UNIT CODE
MEM08007

Control surface finish production and finished product quality

UNIT CODE :
MEM08007

Unit description :
This unit of competency defines the skills and knowledge required to apply the principles of quality assurance, research and quality information to the production process, and perform quality tests to industry standards where analyses are confined to the use of basic instruments.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Control surface finish production and finished product quality

UNIT CODE
MEM08008

Operate and control surface finishing waste treatment process

UNIT CODE :
MEM08008

Unit description :
This unit of competency defines the skills and knowledge required to treat and purify metal finishing effluent waters which typically contain cyanides, hexavalent chromium, heavy metal cations, certain anions and greases using appropriate pre-determined waste treatment processes.

Pre-requisite unit :
MEM11011 , MEM13003 , MEM13015 , MEM16006
UNIT NAME
Operate and control surface finishing waste treatment process

UNIT CODE
MEM08009

Make up solutions

UNIT CODE :
MEM08009

Unit description :
This unit of competency defines the skills and knowledge required to make up solutions and maintain process specific equipment, including probes and electrodes.

Pre-requisite unit :
MEM11011 , MEM13003 , MEM13015 , MEM16006
UNIT NAME
Make up solutions

UNIT CODE
MEM08010

Manually finish/polish materials

UNIT CODE :
MEM08010

Unit description :
This unit of competency defines the skills and knowledge required to finish and polish materials using appropriate media and equipment.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006 , MEM18001
UNIT NAME
Manually finish/polish materials

UNIT CODE
MEM08011

Prepare surfaces using solvents and/or mechanical means

UNIT CODE :
MEM08011

Unit description :
This unit of competency defines the skills and knowledge required to select the appropriate preparation process, select and set up the equipment, undertake blasting or application of solvents on metal and non-metal materials, and check the finished surface.

Pre-requisite unit :
MEM11011 , MEM13003 , MEM13015 , MEM16006 , MEM18001 , MEM18002
UNIT NAME
Prepare surfaces using solvents and/or mechanical means

UNIT CODE
MEM08012

Prepare surfaces by abrasive blasting (basic)

UNIT CODE :
MEM08012

Unit description :
This unit of competency defines the skills and knowledge required to follow pre-determined procedures to perform, at a basic level of skill, surface preparation/cleaning on both ferrous and non-ferrous masonry and cementatious materials/components.

Pre-requisite unit :
MEM08016 , MEM11011 , MEM13003 , MEM13015 , MEM16006
UNIT NAME
Prepare surfaces by abrasive blasting (basic)

UNIT CODE
MEM08013

Prepare surfaces by abrasive blasting (advanced)

UNIT CODE :
MEM08013

Unit description :
This unit of competency defines the skills and knowledge required to perform, at an advanced level of skill, surface preparation using abrasive blasting.

Pre-requisite unit :
MEM08012 , MEM08016 , MEM11011 , MEM13003 , MEM13015 , MEM16006
UNIT NAME
Prepare surfaces by abrasive blasting (advanced)

UNIT CODE
MEM08014

Apply protective coatings (basic)

UNIT CODE :
MEM08014

Unit description :
This unit of competency defines the skills and knowledge required to follow pre-determined procedures to spray pre-treatments and protective coatings at a basic level where an understanding of specific health and safety matters is required. It covers single and two-pack coatings not containing isocyanates.

Pre-requisite unit :
MEM11011 , MEM13003 , MEM13015 , MEM16006
UNIT NAME
Apply protective coatings (basic)

UNIT CODE
MEM08015

Apply protective coatings (advanced)

UNIT CODE :
MEM08015

Unit description :
This unit of competency defines the skills and knowledge required to spray pre-treatments and protective coatings when an advanced level of skill is required. It includes inspection and interpretation of the coating results using all current industry knowledge and test equipment.

Pre-requisite unit :
MEM08014 , MEM11011 , MEM13003 , MEM13015 , MEM16006
UNIT NAME
Apply protective coatings (advanced)

UNIT CODE
MEM08016

Control blast coating by-products, materials and emissions

UNIT CODE :
MEM08016

Unit description :
This unit of competency defines the skills and knowledge required to identify, evaluate and control blaster coating by-products, materials and emissions, including using common containment practices and waste removal processes.

Pre-requisite unit :
MEM11011 , MEM13003 , MEM13015 , MEM16006
UNIT NAME
Control blast coating by-products, materials and emissions

UNIT CODE
MEM11001

Erect/dismantle scaffolding and equipment

UNIT CODE :
MEM11001

Unit description :
This unit of competency defines the skills and knowledge required to prepare, erect and dismantle scaffolding and equipment for maintenance and installation in a workshop and in factories, manufacturing plants and warehouses.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006 , MEM18001
UNIT NAME
Erect/dismantle scaffolding and equipment

UNIT CODE
MEM11009

Handle/move bulk fluids/gases

UNIT CODE :
MEM11009

Unit description :
This unit of competency defines the skills and knowledge required to determine the appropriate handling methods and storage of commercial fluids and gases greater than the quantities required by individuals to do their own jobs and applies to all containers used to store bulk fluids/gases.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Handle/move bulk fluids/gases

UNIT CODE
MEM11010

Operate mobile load shifting equipment

UNIT CODE :
MEM11010

Unit description :
This unit of competency defines the skills and knowledge required to operate mobile load shifting equipment, including planning, moving and placing loads and shutting down and securing equipment after operation where knowledge of codes and signals is not required in workshops and/or on-site locations

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Operate mobile load shifting equipment

UNIT CODE
MEM11022

Operate fixed/moveable load shifting equipment

UNIT CODE :
MEM11022

Unit description :
This unit of competency defines the skills and knowledge required to conduct routine operation and safety checks of fixed/moveable load shifting equipment within the limits of manufacturers' recommended procedures.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Operate fixed/moveable load shifting equipment

UNIT CODE
MEM12001

Use comparison and basic measuring devices

UNIT CODE :
MEM12001

Unit description :
This unit of competency defines the skills and knowledge required to sort items in a production environment or at a workstation using basic comparison measuring equipment.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Use comparison and basic measuring devices

UNIT CODE
MEM13003

Work safely with industrial chemicals and materials

UNIT CODE :
MEM13003

Unit description :
This unit of competency defines the skills and knowledge required to work safely with industrial chemicals and materials subject to codes and regulations that are stored and used in a workplace, for example, chemicals, solvents, dangerous materials, acids and noxious waste products in a manufacturing and/or engineering environment.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Work safely with industrial chemicals and materials

UNIT CODE
MEM13019

Undertake work health and safety activities in the workplace

UNIT CODE :
MEM13019

Unit description :
This unit of competency defines the skills and knowledge required to apply principles of work health and safety (WHS) in the workplace and undertake a safety risk assessment for the employee's area of responsibility. It applies to employees requiring additional WHS competencies beyond those inherent in their job.
UNIT NAME
Undertake work health and safety activities in the workplace

UNIT CODE
MEM18011

Shut down and isolate machines/equipment

UNIT CODE :
MEM18011

Unit description :
This unit of competency defines the skills and knowledge required to isolate and shut down machines and equipment and applies to situations that require extensive system knowledge that exclude the straightforward starting/stopping of machinery/equipment through the use of simple switching, including use of emergency switches.

Pre-requisite unit :
MEM11011 , MEM13015 , MEM16006
UNIT NAME
Shut down and isolate machines/equipment

Note: For some courses, not all electives are available at all campuses.

Ways to study

Choose your study location

CAMPUS	APPRENTICESHIP / TRAINEESHIPS	DELIVERY MODE
Acacia Ridge	Apprenticeship	WORKPLACE Workplace	DROP IN DAYS Drop in days	BLOCK TRAINING Block training	DAY RELEASE Day release	MOBILE VAN Mobile van	Online Online

At TAFE Queensland, we understand that employers need options and flexibility in employee training. We are committed to delivering the flexible training plans you need to get the job done. Choose from workplace training, block training, drop in days, mobile training, day release, online or a mix of all these options. Learn more

You must already be employed to enrol as an apprentice or trainee with TAFE Queensland. Speak to your employer about choosing TAFE Queensland as your Supervising Registered Training Organisation (SRTO).

Costs:

Eligible apprentices and trainees that meet the Queensland state funding requirements will be charged a set fee per nominal hour. These fees are calculated at a regulated rate of $1.60 per nominal hour. Concession rates apply for students who hold a current Health Care Card or who identify as Aboriginal or Torres Strait Islander.

Non-funded apprentices and trainees will be charged a fee for service cost. These will be confirmed prior to the commencement of training.
Information regarding costs will be outlined on the agreed training plan, which will be provided to the employer and apprentice or trainee at time of induction.

Download Brochure

Certificate III in Engineering - Fabrication Trade (MEM31922)

Ask a question

Certificate III in Engineering - Fabrication Trade

COURSE CODE: MEM31922

Payment Options

How can I pay for this course?

No matter what your circumstances, TAFE Queensland has a payment option to suit you. If you are unsure of what’s right for you, get in touch. We’re here to help.

Payment plan

If you have difficulty paying for the full cost of a course upfront, you may be eligible for a payment plan.

Learn more

Upfront payment

This may be the full fee for the course, or the student contribution amount if you are eligible for a subsidy or concession.

Learn more

Entry requirements

There are no formal entry requirements for this course.

Selection criteria

To study an apprenticeship program you must be indentured as an apprentice with your employer.

Employers need to be able to provide the necessary human and physical resources to qualify for an apprentice.

Find out more on how to become an apprentice or trainee

Resources required

You are responsible for meeting the minimum occupational health and safety requirements in practical classes.
This includes the use of:

safety glasses
protective footwear with safety toe cap and non-slip soles to AS2210
long leather gloves to AS2161
hair protection
You should also wear 100% cotton drill industry-standard clothing.

If you fail to meet these minimum standards of dress, you will not be permitted entry into practical classes.

Assessment methods

Skill and knowledge assessments are an essential step in progressing through your course. You may be assessed in a number of ways while you are studying at TAFE Queensland, including observation, written assessment, questioning, portfolios, work samples, third-party feedback, and through recognition of prior learning. Read more about assessment methods.

Pathways

University pathways

If you want to go on to further study at university, TAFE Queensland has a pathway option to get you there. In many cases, completing one of our diplomas may give you a full year of credit towards a degree with one of our partner universities.

Learn more about University Pathways

How to apply

Direct application

If you're ready to get started, simply hit the Apply Now button on your preferred course information page and get your application underway online.

Course disclaimer

All information was accurate at time of publication, however TAFE policies, tuition fees and course content is subject to change without notice. Course commencement is dependent on sufficient enrolment numbers. Timetable information is subject to change prior to commencement and/or during the duration of your course.

Recognition of prior learning (RPL) and credit transfers

Fast track your way to a formal qualification by earning credit for the things you already know. We can assess your skills, directly apply credits from previous successful study, and give you advanced standing in your course.

Learn more

Related courses

Diploma of Engineering - Technical

Progress your career with this advanced technical qualification. Develop your skills further for technician work in the field of mechanical, mechatronic, manufacturing or maintenance engineering.

Careers

Engineering Technologist
Engineering Technician
Mechanical Engineering Technician

Part Time : up to 2 years

Next Start : 24 Jan 2025

Certificate IV in Engineering

Take your career in engineering to the next level with this advanced, post-trade qualification.

Careers

Higher Engineering Tradesperson
Special Class Engineering Tradesperson

Certificate III in Engineering - Mechanical Trade

Fitting/Machining

Get started in your engineering career with this practical qualification. Successful completion of this course will qualify you to become a trade qualified fitter or turner.

Careers

Fitter, Turner

😊 Personalise my view

I am

interested in studying

interested in studying

currently studying

interested in studying

interested in

interested in

interested in

interested in studying

at

Campus

Campus

Campus

Campus

Campus

Campus

Campus

Certificate III in Engineering - Fabrication Trade

Surface Finishing

Course overview

What can I do?

Course outcome:

Industry connections

Free apprenticeships for under 25s

Core units

Elective units

Download Brochure

Ask a question

Certificate III in Engineering - Fabrication Trade

Payment Options

How can I pay for this course?

Payment plan

Upfront payment

Entry requirements

Selection criteria

Resources required

Assessment methods

Pathways

University pathways

How to apply

Direct application

Course disclaimer

Recognition of prior learning (RPL) and credit transfers

Related courses

Diploma of Engineering - Technical

Careers

Certificate IV in Engineering

Careers

Certificate III in Engineering - Mechanical Trade

Careers