Unit code: AURACA001

Unit description: This unit describes the performance outcomes required to identify customer needs and enquiries, and provide effective information and advice when supplying automotive products and services. It applies to those working in an automotive workplace.

Unit code: AURAEA002

Unit description: This unit describes the performance outcomes required to follow environmental and sustainability best practices, including complying with established workplace procedures and environmental regulations as well as following sustainability practices that may reduce the environmental impact of work practices and outputs. It applies to those working in the automotive industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURAFA003

Unit description: This unit describes the performance outcomes required to communicate in an automotive workplace. It involves communicating effectively by conveying and receiving information using verbal and non-verbal techniques and correct automotive technical terminology. It applies to those working in the automotive service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURASA002

Unit description: This unit describes the performance outcomes required to identify and follow safety and emergency procedures in an automotive workplace. It involves those safety procedures to be followed when using workplace hand tools and hand-held power tools, fixed equipment, and chemicals, and when running vehicles and machinery. It includes the individual’s responsibility for safety and emergency response in the event of an accident or incident. It applies to those working on agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, motorcycles, mobile plant machinery or outdoor power equipment in the automotive service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURETR012

Unit description: This unit describes the performance outcomes required to inspect, test and repair basic electrical circuits in vehicle and machinery electrical systems. It involves preparing for the task, inspecting and testing the circuit, repairing the circuit, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The basic electrical circuits include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, motorcycles, mobile plant machinery or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURETR025

Unit description: This unit describes the performance outcomes required to test, charge, replace, retest and secure a range of automotive batteries, including vehicle or machinery jump-starting procedures. It involves preparing for the task, inspecting and testing the battery to determine serviceability, charging, jump-starting, removing and replacing, and undertaking the final retesting of batteries, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The batteries include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, motorcycles, mobile plant machinery or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURETR029

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the charging systems of vehicles, vessels or machinery. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in an automotive service and repair industry. The charging systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURETR030

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the starting systems of vehicles, vessels or machinery. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in an automotive service and repair industry. The starting systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURHTE002

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in heavy vehicle compression ignition engines. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The compression ignition engines include those in agricultural machinery, heavy commercial vehicles, mobile plant machinery or marine vessels. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURHTF002

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the diesel fuel injection systems of heavy vehicles and machinery. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The diesel fuel injection systems include those in agricultural machinery, heavy commercial vehicles, marine vessels or mobile plant machinery. The unit does not apply to electronic compression ignition engine management systems. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURHTQ003

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in heavy vehicle drive shafts. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. Drive shafts include those in agricultural machinery, heavy commercial vehicles or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURKTA011

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the hydraulic systems of mobile plant. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The mobile plant hydraulic systems include those in agricultural machinery or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURKTB001

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the braking systems of agricultural machinery and mobile plant machinery. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The braking systems include those in agricultural machinery or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURKTD002

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the steering systems of mobile plant. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The steering systems include those in agricultural machinery or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURKTQ001

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the final drive assemblies of mobile plant. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The final drive assemblies include those in agricultural machinery or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURKTX001

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in powershift transmissions. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The powershift transmissions include those in agricultural machinery or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTA004

Unit description: This unit describes the performance outcomes required to carry out servicing operations. It involves preparing for the task, identifying lubricant requirements, servicing and adjusting vehicle and machinery, reporting the inspection findings, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The servicing operations include those of agricultural machinery, heavy commercial vehicles, light vehicles, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTA005

Unit description: This unit describes the performance outcomes required to select and use bearings, seals, gaskets, sealants and adhesives in the automotive vehicle industry. It involves preparing for the task, selecting and using sealants and adhesives, preparing and installing bearings, seals and gaskets, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry, It includes agricultural machinery, heavy commercial vehicles, light vehicle, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTA018

Unit description: This unit describes the performance outcomes required to carry out diagnostic procedures on vehicles, vessels or machinery. It involves confirming the existence of a fault, choosing the appropriate diagnostic procedure and tools, applying the diagnostic procedure, and reporting conclusions. It applies to those working in the automotive service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTB001

Unit description: This unit describes the performance outcomes required to inspect and service braking systems according to manufacturer specifications. It involves preparing for the task, inspecting the system, reporting the inspection findings, servicing and adjusting the system, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The braking systems include those of agricultural machinery, heavy commercial vehicles, light vehicles, motorcycles, mobile plant machinery, outdoor power equipment or trailers. The braking systems may be hydraulic, air over hydraulic, air, mechanical, or hand and parking braking systems. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTC003

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the cooling systems of vehicles. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The cooling systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTF002

Unit description: This unit describes the performance outcomes required to inspect and service diesel fuel injection systems. It involves preparing for the task, inspecting the fuel injection system for leaks, inspecting the air filter, reporting the inspection findings, servicing and adjusting the system, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The diesel fuel injection systems include those of agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, motorcycles, mobile plant or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTE004

Unit description: This unit describes the performance outcomes required to inspect and service engines. It involves preparing for the task, inspecting the engine, reporting the inspection findings, servicing and adjusting the engine, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The engines include those of agricultural machinery, heavy commercial vehicles, light vehicles, mobile plant or motorcycles. The unit does not apply to outdoor power equipment engines. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTK002

Unit description: This unit describes the performance outcomes required to select, use, maintain and store tools and equipment in an automotive workplace. It applies to those working in all sectors of the automotive industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURETR024

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the electronic compression ignition engine management systems of vehicles or machinery. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in an automotive service and repair industry. Compression ignition engine management systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURHTJ003

Unit description: This unit describes the performance outcomes required to remove, inspect and refit the wheel and tyre assemblies of heavy vehicles. It involves identifying and confirming work requirements; preparing for the work; removing, inspecting and refitting the wheel and tyre assembly; and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The wheel and tyre assemblies include those of agricultural machinery, forklifts, heavy commercial vehicles or mobile plant machinery. This unit does not apply to off-the-road tyres of mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURHTX001

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the manual transmissions of heavy vehicles. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The manual transmissions include those in agricultural machinery, heavy commercial vehicles or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURHTX004

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the clutch systems of heavy vehicles. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The clutch systems include those in agricultural machinery, heavy commercial vehicles or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURHTZ001

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the emission control systems of heavy vehicles. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The emission control systems include those in agricultural machinery, heavy commercial vehicles, marine vessels or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURKTD001

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the suspension systems of mobile plant. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The suspension systems include those in agricultural machinery or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTA006

Unit description: This unit describes the performance outcomes required to inspect and service hydraulic systems. It involves preparing for the task, inspecting the system, reporting the inspection findings, servicing and adjusting the system, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The hydraulic systems include those of agricultural machinery, heavy commercial vehicles, marine vessels, mobile plant machinery or outdoor power equipment. This unit is not intended for drive systems, power steering or hydraulic braking systems. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTF005

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in engine forced-induction systems. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. Forced-induction systems include those in agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTX006

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in hydrostatic transmissions and their associated components. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The unit applies to hydrostatic transmissions in agricultural machinery, mobile plant machinery or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTZ002

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the exhaust systems of vehicles. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The unit applies to exhaust systems in agricultural machinery, heavy commercial vehicles, light vehicles, marine vessels, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: MEM05007C

Unit description:

This unit covers performing manual heating, thermal cutting and gouging including the assembly and disassembly and operation of the equipment on a range of materials (ferrous, non-ferrous and non-metallic) using a variety of methods.

Unit code: MEM05050B

Unit description:

This unit covers preparing materials and routine gas metal arc welding (GMAW).

Unit code: AURHTB001

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the air braking systems of heavy vehicles. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The air braking systems include those in agricultural machinery, heavy commercial vehicles or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication

Unit code: AURTTA014

Unit description: This unit describes the performance outcomes required to assemble and install pneumatic system components. It involves preparing for the task, assembling and installing pneumatic system components, performing post-assembly testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The pneumatic systems include those of agricultural machinery, heavy commercial vehicles or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTA017

Unit description: This unit describes the performance outcomes required to carry out a vehicle safety inspection, compare findings with manufacturer specifications, and report those findings. It involves preparing for the task, carrying out a vehicle safety inspection, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTQ001

Unit description: This unit describes the performance outcomes required to inspect and service final drive assemblies. It involves preparing for the task, inspecting the assembly, reporting the inspection findings, servicing and adjusting the assembly, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The final drive assemblies include those of agricultural machinery, heavy commercial vehicles, light vehicles, mobile plant machinery or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURKTA005

Unit description: This unit describes the performance outcomes required to inspect, service and repair faults in track type drive and support systems. It involves preparing for the task, inspecting the system to determine the service and repair requirements, carrying out the service and repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The track type drive and support systems include those of agricultural machinery or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURETU003

Unit description: This unit describes the performance outcomes required to service air conditioning systems, including heating, ventilation and air conditioning (HVAC) systems, fitted to a range of vehicles and machinery. It involves preparing for the task, carrying out performance testing and correct servicing procedures, performing post-service testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. Automotive air conditioners, including HVAC systems, include those in agricultural machinery, heavy commercial vehicles, light vehicles or mobile plant machinery. Licensing requirements apply to this unit. Users are advised to check with relevant regulatory authority. An Australian Refrigeration Council accredited (ARCtick) Refrigerant Handling licence is required for those carrying out this work.

Unit code: AURETU004

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in the air conditioning systems, including heating, ventilation and air conditioning (HVAC) systems, fitted to a range of vehicles and machinery for passenger convenience and comfort. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in an automotive service and repair industry. Automotive air conditioners, including HVAC systems, include those in agricultural machinery, heavy commercial vehicles, light vehicles or mobile plant machinery. Licensing requirements apply to this unit. Users are advised to check with relevant regulatory authority

Unit code: AURETU005

Unit description: This unit describes the performance outcomes required to retrofit and modify air conditioning systems, including heating, ventilation and air conditioning (HVAC) systems, fitted to a range of vehicles and machinery. It involves preparing for the task, selecting the correct de-gas procedure, carrying out the retrofit and modification procedures, performing post-modification testing, and completing workplace processes and documentation. Air conditioning systems may contain a mixture of both natural and flammable synthetic refrigerants that are difficult to accurately identify and safely recover. To minimise the possibility of ignition, the procedures and equipment used when recovering refrigerants must be those required for flammable refrigerants. It applies to those working in the automotive service and repair industry. Automotive air conditioners, including HVAC systems, include those in agricultural machinery, heavy commercial vehicles, light vehicles or mobile plant machinery. Licensing requirements apply to this unit. Users are advised to check with relevant regulatory authority. An Australian Refrigeration Council accredited (ARCtick) Refrigerant Handling licence is required for those carrying out this work.

Unit code: AURKTR001

Unit description: This unit describes the performance outcomes required to diagnose and repair faults in electronic over hydraulic control systems. It involves preparing for the task, selecting the correct diagnostic procedure, carrying out the diagnosis and the repair, performing post-repair testing, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The electronic over hydraulic control systems include those in agricultural machinery, heavy commercial vehicles, marine vessels or mobile plant machinery. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTK001

Unit description: This unit describes the performance outcomes required to select, use, maintain and store automotive measuring equipment. It involves selecting and maintaining measuring equipment, and using measuring equipment to determine length, width, angles, ovality, depth, out of square, clearances, run-out, pressure and temperature of automotive components and materials. It applies to those working in all sectors of the automotive industry. This unit does not apply to electrical measuring equipment that measures voltage, resistance or current flow. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Unit code: AURTTX002

Unit description: This unit describes the performance outcomes required to inspect and service manual transmissions. It involves preparing for the task, inspecting the transmission, reporting the inspection findings, servicing and adjusting the transmission, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The manual transmissions include those of agricultural machinery, heavy commercial vehicles, light vehicles, motorcycles, mobile plant machinery or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.