Unit code: UEENEEE101A

Unit description:

This unit specifies the mandatory requirements of occupational health and safety and how they apply to the various electrotechnology work functions. It encompasses responsibilities for health and safety, risk management processes at all operative levels and adherence to safety practices as part of the normal way of doing work.

Unit code: UEENEEE104A

Unit description:

This unit covers determining correct operation of single source d.c. series, parallel and series-parallel circuits and providing solutions as they apply to various electrotechnology work functions. It encompasses working safely, problem solving procedures, including the use of voltage, current and resistance measuring devices, providing solutions derived from measurements and calculations to predictable problems in single and multiple path circuits.

Unit code: UEENEEE141A

Unit description:

This unit covers routine tools, equipment and personnel protective equipment required to do work in the energy sector environment, is used in accordance with the schedule of work to ensure work is completed in an agreed time, to a quality standard and with a minimum waste.

Unit code: UEENEEE148A

Unit description:

This unit covers undertake scheduled routine work activities in the energy sector in an agreed time, to a quality standard and with a minimum of waste It encompasses working safely, applying knowledge of carrying out routine work activities in electrotechnology environments.

Unit code: UEENEEE179A

Unit description:

This unit covers undertaking a schedule of work for selecting appropriately identified components, accessories or materials in an agreed time, to a quality standard and with a minimum of waste, using appropriate technology mediums where required.

Unit code: UEENEEK142A

Unit description:

This competency standard unit requires the worker to undertake methods of work practice that minimises energy and material usage and to seek energy reduction strategies in the energy sector workplace. The unit seeks to minimise negative impacts on the environment.

Unit code: HLTAID001

Unit description:

This unit of competency describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.

Unit code: UEENEEA101A

Unit description:

This unit covers fitting and inter connecting of electronic sub assemblies. It encompasses the safe use of hand tools, powered tools, identifying components, high reliability soldering, following set procedures and work instructions and keeping work records.

Unit code: UEENEEA102A

Unit description:

This unit covers identifying and selecting electronic components for assembly from job specifications. It encompasses working safely, interpreting job specifications, identifying components by colour code and markings and following quality procedures and work instructions.

Unit code: UEENEED101A

Unit description:

This unit covers the basic use of personal computers application relevant to a work function. It encompasses switching the computer on, applying user preferences, selecting basic applications, entering and retrieving information and printing files.

Unit code: UEENEEE020B

Unit description:

This unit covers instructing customers/users in the use of electrotechnology apparatus. It encompasses appropriate customer relations, the use of apparatus manufacturer's instruction material, basic instruction methods and evaluation and completing documentation.

Unit code: UEENEEE102A

Unit description:

This unit covers basic fitting and fabrication techniques as they apply in the various utilities industry work functions. It encompasses the safe use of hand, fixed and portable power tools; cutting, shaping joining and fixing using metallic and non-metallic materials; dismantling and assembling equipment; basic mechanical measurement and marking-out and reading drawings/diagrams.

Unit code: UEENEEE105A

Unit description:

This unit covers fixing, securing and mounting techniques as apply in the various electrotechnology work functions. It encompasses the safe use of hand and portable power tools, safe lifting techniques, safe use of ladders and elevated platforms and the selection and safe application of fixing devices and supporting accessories/equipment.

Unit code: UEENEEC001B

Unit description:

This unit covers the maintenance of the variety of documentation required to record work activities, purchases and expenses and compliance obligations. It encompasses documentation typically required in an electrotechnology enterprise, work instructions and procedures and time management.

Unit code: UEENEEE122A

Unit description:

This unit covers the carrying out of preparatory work related to any energy sector work discipline. It encompasses working safely, following basic instructions under direct supervision. It will include energy sector support activities including the use of basic hand tools, the safe use of ladders and elevated work platforms and the fixing and securing of equipment under direction following routine work practices.

Unit code: CPCCOHS1001A

Unit description:

This unit of competency specifies the outcomes required to undertake Occupational Health and Safety (OHS) induction training within the construction industry. It requires the ability to demonstrate personal awareness of OHS legislative requirements, and the basic principles of risk management and prevention of injury and illness in the construction industry. Licensing requirements will apply to this unit of competency depending on the regulatory requirements of each jurisdiction.

Unit code: HLTAID001

Unit description:

This unit of competency describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.

Unit code: UEENEEA102A

Unit description:

This unit covers identifying and selecting electronic components for assembly from job specifications. It encompasses working safely, interpreting job specifications, identifying components by colour code and markings and following quality procedures and work instructions.

Unit code: UEENEEC010B

Unit description:

This unit covers the interacting with customers to identify and meet their service needs. It encompasses following community and enterprise policies and standards, identifying customer needs, identifying and resolving problems/issues and maintaining product/service quality.

Unit code: UEENEED101A

Unit description:

This unit covers the basic use of personal computers application relevant to a work function. It encompasses switching the computer on, applying user preferences, selecting basic applications, entering and retrieving information and printing files.

Unit code: UEENEEE020B

Unit description:

This unit covers instructing customers/users in the use of electrotechnology apparatus. It encompasses appropriate customer relations, the use of apparatus manufacturer's instruction material, basic instruction methods and evaluation and completing documentation.

Unit code: UEENEEE102A

Unit description:

This unit covers basic fitting and fabrication techniques as they apply in the various utilities industry work functions. It encompasses the safe use of hand, fixed and portable power tools; cutting, shaping joining and fixing using metallic and non-metallic materials; dismantling and assembling equipment; basic mechanical measurement and marking-out and reading drawings/diagrams.

Unit code: UEENEEE105A

Unit description:

This unit covers fixing, securing and mounting techniques as apply in the various electrotechnology work functions. It encompasses the safe use of hand and portable power tools, safe lifting techniques, safe use of ladders and elevated platforms and the selection and safe application of fixing devices and supporting accessories/equipment.

Unit code: UEENEEH102A

Unit description:

This unit deals with the replacement of electronic components, cabling and sub systems of electronic apparatus. It encompasses safe working practices, following written and oral instruction and procedures, basic testing and techniques, dismantling and assembling apparatus and disconnecting and reconnecting components.

Unit code: CPCCOHS1001A

Unit description:

This unit of competency specifies the outcomes required to undertake Occupational Health and Safety (OHS) induction training within the construction industry. It requires the ability to demonstrate personal awareness of OHS legislative requirements, and the basic principles of risk management and prevention of injury and illness in the construction industry. Licensing requirements will apply to this unit of competency depending on the regulatory requirements of each jurisdiction.

Unit code: HLTAID001

Unit description:

This unit of competency describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.

Unit code: UEENEEE102A

Unit description:

This unit covers basic fitting and fabrication techniques as they apply in the various utilities industry work functions. It encompasses the safe use of hand, fixed and portable power tools; cutting, shaping joining and fixing using metallic and non-metallic materials; dismantling and assembling equipment; basic mechanical measurement and marking-out and reading drawings/diagrams.

Unit code: UEENEEE105A

Unit description:

This unit covers fixing, securing and mounting techniques as apply in the various electrotechnology work functions. It encompasses the safe use of hand and portable power tools, safe lifting techniques, safe use of ladders and elevated platforms and the selection and safe application of fixing devices and supporting accessories/equipment.

Unit code: UEENEEE107A

Unit description:

This unit covers the use of drawings, diagrams, cable schedules, standards, codes and specifications as they apply to the various electrotechnology work functions. It encompasses the rudiments for communicating with schematic, wiring and mechanical diagrams and equipment and cable/connection schedules, manuals, site and architectural drawings and plans showing the location of services, apparatus, plant and machinery and understanding the use and format of compliance standards and job specifications.

Unit code: UEENEEE130A

Unit code: CPCCOHS1001A

Unit description:

This unit of competency specifies the outcomes required to undertake Occupational Health and Safety (OHS) induction training within the construction industry. It requires the ability to demonstrate personal awareness of OHS legislative requirements, and the basic principles of risk management and prevention of injury and illness in the construction industry. Licensing requirements will apply to this unit of competency depending on the regulatory requirements of each jurisdiction.

Unit code: HLTAID001

Unit description:

This unit of competency describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.

Unit code: UEENEEA101A

Unit description:

This unit covers fitting and inter connecting of electronic sub assemblies. It encompasses the safe use of hand tools, powered tools, identifying components, high reliability soldering, following set procedures and work instructions and keeping work records.

Unit code: UEENEEA102A

Unit description:

This unit covers identifying and selecting electronic components for assembly from job specifications. It encompasses working safely, interpreting job specifications, identifying components by colour code and markings and following quality procedures and work instructions.

Unit code: UEENEED101A

Unit description:

This unit covers the basic use of personal computers application relevant to a work function. It encompasses switching the computer on, applying user preferences, selecting basic applications, entering and retrieving information and printing files.

Unit code: UEENEEE102A

Unit description:

This unit covers basic fitting and fabrication techniques as they apply in the various utilities industry work functions. It encompasses the safe use of hand, fixed and portable power tools; cutting, shaping joining and fixing using metallic and non-metallic materials; dismantling and assembling equipment; basic mechanical measurement and marking-out and reading drawings/diagrams.

Unit code: UEENEEE105A

Unit description:

This unit covers fixing, securing and mounting techniques as apply in the various electrotechnology work functions. It encompasses the safe use of hand and portable power tools, safe lifting techniques, safe use of ladders and elevated platforms and the selection and safe application of fixing devices and supporting accessories/equipment.

Unit code: UEENEEE107A

Unit description:

This unit covers the use of drawings, diagrams, cable schedules, standards, codes and specifications as they apply to the various electrotechnology work functions. It encompasses the rudiments for communicating with schematic, wiring and mechanical diagrams and equipment and cable/connection schedules, manuals, site and architectural drawings and plans showing the location of services, apparatus, plant and machinery and understanding the use and format of compliance standards and job specifications.

Unit code: UEENEEE137A

Unit description:

This unit covers identifying occupational health and safety hazard and risks and documenting control measures. It encompasses identifying workplace hazards, assigning levels of risk, developing control measures to eliminate and/or mitigate risks, reviewing risk control measures and maintaining documentation of hazards, risk control measures and their application in accordance with compliance procedures.

Unit code: RIIWHS204D

Unit description:

This unit describes a participant's skills and knowledge required to work safety at heights in the Resources and Infrastructure Industries. This unit it appropriate for those working in operational roles where they are required to perform work at heights.

Unit code: CPCCWHS1001

Unit description: This unit of competency specifies the mandatory work health and safety training required prior to undertaking construction work. The unit requires the person to demonstrate personal awareness and knowledge of health and safety legislative requirements in order to work safely and prevent injury or harm to self and others. It covers identifying and orally reporting common construction hazards, understanding basic risk control measures, and identifying procedures for responding to potential incidents and emergencies. It also covers correctly selecting and fitting common personal protective equipment (PPE) used for construction work.

Unit code: HLTAID001

Unit description:

This unit of competency describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.

Unit code: UEENEED101A

Unit description:

This unit covers the basic use of personal computers application relevant to a work function. It encompasses switching the computer on, applying user preferences, selecting basic applications, entering and retrieving information and printing files.

Unit code: UEENEEA101A

Unit description:

This unit covers fitting and inter connecting of electronic sub assemblies. It encompasses the safe use of hand tools, powered tools, identifying components, high reliability soldering, following set procedures and work instructions and keeping work records.

Unit code: UEENEEA102A

Unit description:

This unit covers identifying and selecting electronic components for assembly from job specifications. It encompasses working safely, interpreting job specifications, identifying components by colour code and markings and following quality procedures and work instructions.

Unit code: UEENEEE102A

Unit description:

This unit covers basic fitting and fabrication techniques as they apply in the various utilities industry work functions. It encompasses the safe use of hand, fixed and portable power tools; cutting, shaping joining and fixing using metallic and non-metallic materials; dismantling and assembling equipment; basic mechanical measurement and marking-out and reading drawings/diagrams.

Unit code: UEENEEE105A

Unit description:

This unit covers fixing, securing and mounting techniques as apply in the various electrotechnology work functions. It encompasses the safe use of hand and portable power tools, safe lifting techniques, safe use of ladders and elevated platforms and the selection and safe application of fixing devices and supporting accessories/equipment.