Unit code: MEM12023A

Unit description:

This unit covers performing measurement skills requiring straight forward use of mechanical measuring devices and associated calculations.

Unit code: MEM12024A

Unit description:

This unit covers estimating approximate answers to arithmetical problems, carrying out basic calculations involving percentages and proportions, and determining simple ratios and averages. The unit includes producing and interpreting simple charts and graphs.

Unit code: MEM13014A

Unit description:

This unit covers following occupational health and safety procedures in an engineering or similar work environment.

Unit code: MEM14004A

Unit description:

This unit covers a person planning their own work where tasks involve one or more steps or functions and are carried out routinely on a regular basis. It includes the concepts of following routine instructions, specifications and requirements.

Unit code: MEM14005A

Unit description:

This unit covers planning activities which, whilst following established procedures, may require a response and modification of procedures or choice of different procedures to deal with unforeseen developments.

Unit code: MEM15002A

Unit description:

This unit covers working within a quality improvement system, either individually or in a team situation.

Unit code: MEM15024A

Unit description:

This unit covers applying established quality procedures to an employee's own work within a manufacturing, engineering or related environment.

Unit code: MEM16006A

Unit description:

This unit covers accessing, organising and communicating information related to processes or tasks.

Unit code: MEM16007A

Unit description:

This unit covers operating in an interactive work environment. It covers contribution to a group effort in order to plan and carry out work. This includes identification of work roles, communication and cooperation with others.

Unit code: MEM16008A

Unit description:

This unit covers accessing, inputting and storing information used in manufacturing, engineering or related environments, using computing technology.

Unit code: MEM17003A

Unit description:

This unit covers assisting in the provision of on the job training to others while undertaking normal duties.

Unit code: MSAENV272B

Unit description:

This competency covers the outcomes required to effectively measure current resource use and carry out improvements including those reducing negative environmental impacts of work practices. This unit is based on the sustainability guideline standard GCSSUS01A Participate in environmentally sustainable work practices.

Unit code: MEM03003B

Unit description:

The unit covers assembling prefabricated/formed components using a range of joining techniques.

Unit code: MEM05005B

Unit description:

This unit covers setting up and operating a range of mechanical cutting and holing equipment.

Unit code: MEM05007C

Unit description:

This unit covers performing manual heating, thermal cutting and gouging including the assembly and disassembly and operation of the equipment on a range of materials (ferrous, non-ferrous and non-metallic) using a variety of methods.

Unit code: MEM05016C

Unit description:

This unit covers preparing materials, selecting and setting up the welding equipment, carrying out advanced manualmetal arc welding (MMAW), inspecting for and correcting defects, and maintaining the weld records.

Unit code: MEM05010C

Unit description:

This unit covers applying the fabrication of shapes and products using a variety of forming and shaping techniques, using a variety of tools and equipment.

Unit code: MEM05011D

Unit description:

This unit covers assembling general fabricated components in plate, pipe and section or sheet.

Unit code: MEM05012C

Unit description:

This unit covers preparing the materials and carrying out routine manual metal arc welding (MMAW).

Unit code: MEM05015D

Unit description:

This unit covers preparing materials, selecting and setting up the welding equipment, carrying out the manual metal arc welding (MMAW), and inspecting for and correcting defects, in a range of fabrication activities.

Unit code: MEM05016C

Unit description:

This unit covers preparing materials, selecting and setting up the welding equipment, carrying out advanced manualmetal arc welding (MMAW), inspecting for and correcting defects, and maintaining the weld records.

Unit code: MEM05017D

Unit description:

This unit covers preparing materials, selecting and setting up gas metal arc welding equipment, carrying out the welding, visually inspecting welds and correcting defects.

Unit code: MEM05018C

Unit description:

This unit covers preparing materials, selecting and setting up the welding equipment, carrying out advanced gas metal arc welding (GMAW), inspecting for and correcting defects, and maintaining the weld records.

Unit code: MEM05019D

Unit description:

This unit covers preparing materials, selecting and setting up the welding equipment, carrying out the gas tungsten arc welding (GTAW) and inspecting for and correcting defects.

Unit code: MEM05036C

Unit description:

This unit covers assessing task requirements; preparing materials; undertaking the repair, replacement or modification of the fabrication; cleaning and finishing to specifications; and inspecting the result.

Unit code: MEM05037C

Unit description:

This unit covers marking out general fabrications using geometric development.

Unit code: MEM05049B

Unit description:

This unit covers preparing the materials and carrying out routine gas tungsten arc welding (GTAW).

Unit code: MEM05050B

Unit description:

This unit covers preparing materials and routine gas metal arc welding (GMAW).

Unit code: MEM05051A

Unit description:

This unit covers identifying material properties and selecting appropriate welding processes to achieve safe andeffective welding outcomes.

Unit code: MEM05052A

Unit description:

This unit covers identifying risks associated with welding operations and implementing hazard reduction practices.

Unit code: MEM09002B

Unit description:

This unit covers interpreting technical drawing applying to any of the full range of engineering disciplines.

Unit code: MEM11011B

Unit description:

This unit covers lifting and moving materials manually.

Unit code: MEM12007D

Unit description:

This unit of competency covers the skills required by an Engineering Tradesperson Fabrication for transferring the dimensions from the detail drawing to work, making templates as required, developing patterns and/or transferring measurements to structures, interpreting relevant codes, standards and symbols and estimating quantities of material from drawings.

Unit code: MEM13001B

Unit description:

This unit covers performing basic emergency first aid, EAR (expired air resuscitation) and CPR (cardiopulmonary resuscitation).

Unit code: MEM18001C

Unit description:

This unit covers using a range of hand tools for a variety of general engineering applications.

Unit code: MEM18002B

Unit description:

This unit covers using a range of hand held power tools and fixed power tools for hand held operations for a variety of general engineering applications.